Download archive
All versions of the SmartFleet server, with the required steps for manual updates.
Every server package contains all changes of the versions before it. An update therefore only needs the latest version – unless there is a required step between the installed and the latest version. That step is installed first, then the next required step and finally the latest version. With automatic updates the server does this by itself.
Which packages do I need?
- 1.7.1
- 1.7.2
Download 1.7.2 and install it under Settings → Updates.
- 1.7.0
- 1.7.2
Download 1.7.2 and install it under Settings → Updates.
- 1.6.3
- 1.7.0
- 1.7.2
Install these 2 packages one after the other under Settings → Updates: 1.7.0, then 1.7.2.
- 1.6.2
- 1.7.0
- 1.7.2
Install these 2 packages one after the other under Settings → Updates: 1.7.0, then 1.7.2.
- 1.6.1
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.6.0
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.5.3
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.5.2
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.5.1
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.5.0
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.4.2
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.4.1
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.4.0
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.3.1
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
- 1.3.0
- 1.6.2
- 1.7.0
- 1.7.2
Install these 3 packages one after the other under Settings → Updates: 1.6.2, then 1.7.0, then 1.7.2.
| Version | Date | Size | Changes | Download |
|---|---|---|---|---|
| 1.7.2latest | 2026-10-30 | ZIP, 4.0 MB | Anonymous installation statistics (can be switched off under System Administration → Updates) and a hint on new Loxone firmware including the Remote Connect deadline.SHA-2566f1aac96ac5f35a04d69124f1f977edeab97795ee45e537c4cfc84a1ceaa5473 | |
| 1.7.1 | 2026-10-29 | ZIP, 4.0 MB | Bug fix: project files in which Loxone Config writes an attribute twice (for example with blocks of the Fronius plugin) can be read again. The installation documentation and the system values catalog are complete again.SHA-2564222f6711835edbe2fbb8ed0807c8d3dda834f02c995ee34ed08359f53a19a3e | |
| 1.7.0required step | 2026-10-28 | ZIP, 4.0 MB | Required step: the server works much more efficiently. Fewer database queries on every gateway contact and in the alarm run, older chart values are stored compactly, pages load faster (smaller scripts, data loaded only when a tab is opened, longer browser caching), project files need only a fraction of the memory when evaluated. Orphaned storage is cleaned up. Later updates go through this version.SHA-256ab260c06fd27fc32230eb24c21c7eedc0cc3f7b9f3dea832b8ebe41c245aa11a | |
| 1.6.3 | 2026-10-26 | ZIP, 4.0 MB | Bug fixes: long chart periods show the latest values again, the gateway list appears for users with site roles, the system history uses the site retention period. Aborted uploads and open project keys are cleaned up hourly; a project file that cannot be evaluated no longer blocks the gateway.SHA-256c7f07193547d7a6923eb47869c07489d7eca0f28fbb4ab1f54bfd2024adf2a8b | |
| 1.6.2required step | 2026-10-26 | ZIP, 4.0 MB | Required step: the database is cleaned up, old device columns of the sites are removed. Later updates go through this version. Also small fixes in the setup and at the end of a remote session.SHA-256cee401c1992fe20ca736c7dccbbcfcf24fd676a1ff3984f74ccd6dc93917d873 | |
| 1.6.1 | 2026-10-25 | ZIP, 4.0 MB | Backups only with the password vault: the server no longer accepts unencrypted backups. Gateways before LoxBerry plugin 1.3.0 or firmware 1.1.0 upload backups again only after their update.SHA-2562a2519afb8e13450384f098e9dd2d4f19e46455a44d63bb5cf696b1dcef916a7 | |
| 1.6.0 | 2026-10-25 | ZIP, 4.0 MB | Backups and project files in the password vault: the gateways encrypt them with the site key, the server cannot read them; downloads require the master password. Recovery code with emergency sheet, new sites are created with a vault, error in the system status when a site has no vault. Fully effective with plugin 1.3.0 and firmware 1.1.0.SHA-25684a5bfe237a39697887f69dd8028fbad2235eb5561e2f418e827144c4cd5b41f | |
| 1.5.3 | 2026-10-19 | ZIP, 3.9 MB | Security: activating a license no longer leaves a retrievable backup copy of config.php behind. License limits are visible in the interface: new sites, dashboards and system schematics are locked at the limit, license notes shown as a fixed blue box. Minor bug fixes.SHA-256bd169021b44d303668d6f870384f16ae8447643c9941d4bdaefea84b07803aa9 | |
| 1.5.2 | 2026-10-19 | ZIP, 3.9 MB | Charts can be reordered with mouse, touch and keyboard. Sites and Miniservers are sorted A to Z by default. Light/dark button with moon and sun, minor display fixes in system status and alarm management.SHA-256f48daea644cb3c9d14e1a8faaabee89b4d543eccb2f86bdc0e77d504ca7cc032 | |
| 1.5.1 | 2026-10-18 | ZIP, 3.9 MB | Messages in the language of the interface: gateway messages, job results and alarm mails appear in English when the interface or the recipient is set to English. Fully effective with plugin 1.2.4 and firmware 1.0.2.SHA-256cc371a96e13aadb8c48fe5c7788764007005468f0a76cbf2f9e39549de1faad2 | |
| 1.5.0 | 2026-10-18 | ZIP, 3.9 MB | Remote maintenance of the SmartFleet gateway in its own tab and firmware updates from the partner UI, reworked interface (menu on phones and tablets, messages above the tabs, acknowledged messages marked) and many bug fixes.SHA-256c0441ef3efbc1bfff0aabb711f56030ae3be185621d3758c44bf4cfc351b8ac1 | |
| 1.4.2 | 2026-10-13 | ZIP, 3.9 MB | Bug fix: project files containing invalid characters can be read again (system documentation, system values). Error display in the Documentation tab.SHA-2563fd17cd4bee5ed8666547d2e5458a9a8ad85c2e6384ca173ba45526860671c10 | |
| 1.4.1 | 2026-10-08 | ZIP, 3.9 MB | Backups without a fixed size limit: the only limit is the site's storage quota.SHA-2568f7d22fc823bcce46606f8b58232f451b1a2e36879864251663cd7a5c0dba3e3 | |
| 1.4.0 | 2026-10-08 | ZIP, 3.9 MB | Several gateways per site, new Gateways tab, gateway management in the site settings, backups via the SmartFleet gateway.SHA-256c28c68bd6932300d6288019569b90b7104db3439a6c63371faf4b5679c0d16b3 | |
| 1.3.1 | 2026-10-02 | ZIP, 3.8 MB | Bug fix: after a fresh installation, the sign-in page offers the initial setup with a test email again.SHA-25652e67680982bf3b110ba7ae2eb3f1be051b994765347824ac8bc7c3a25053177 | |
| 1.3.0 | 2026-10-02 | ZIP, 3.8 MB | First public release.SHA-2560ee27792ec413596af3526846279d30e9e5f7830a6b1a654d33572a33bcf4730 |
What is a required step?
A required step cleans up the database, removing columns or tables that no newer version needs. So that an interrupted update always falls back to a matching version, no required step can be skipped. When you upload a package, the server tells you which version is missing.
Checksum and update procedure: Manual, server updates